RSS

Tag Archives: blind panels

Wanpan – Hot Water Skirting Board Heating System

Wanpan – hot water skirting board heating system is a complete heating system with heating modules including copper pipe connectors and automatic thermostatic control for each room. Heating panels of Wanpan heating system are made from coated aluminium profiles, with copper supply and return pipes.

In corners, at the ends and at the feed blind panels are placed over the piping to give the same appearance all around the room. Electric sockets can be fitted onto Wanpan panel.

Wanpan heating panels are only 25 mm thick and are available in the following module sizes: 24x36x400 mm, 24x136x600 mm, 24x136x800 mm

Click to enlargeand the same intervals, up to 24x136x3000 mm or 24x136x3200 mm.

Heating panels of Wanpan hydronic system are available in two standart colors: White – RAL 9010 and Grey – RAL 7035. Ordering different color (with refer to RAL Catalog) additional charges will apply.

Wanpan hot water skirting board heating system is tested for a working preasure up to 16 bar and is approved by public authorities in number of countries.

For more information go to: www.wanpan-usa.com.

 

Tags: , , , , , , , , , , , ,

No Cracking Noise while Using the Elpan/Wanpan Ultimate Heating System

There is no cracking noise while using the Elpan/Wanpan ultimate heating system. You will find an explanation below – what is the main reason, that some customers experiencing cracking noise after they had installed skirting board heating system.Click to enlarge

Cracking noise may appear if the blind panels of the skirting board heating system are cut not as per mounting instructions, and there is not enough room left for metal expansion while heated. If construction/installation companies are not doing the heating trial for 1/2 hours before they cut blind panels, they may have blind panels being cut too long and no distance left for metal expansion. Then the cracking sound could appear.

Blind panels have to be measured and cut not earlier than after 1/2 hour of trial heating. Even after that, leaving 2-3 mm of the distance between blind panel and heating panel is strongly suggested. It will allow metal to expand even more –  silently, without making any noise.

There is no cracking noise while using Elpan/Wanpan ultimate heating system if the installation instructions of the skirting board heating system were followed completely.

For more information go to: www.wanpan-usa.com.

 
Leave a comment

Posted by on June 20, 2013 in Product and Installation

 

Tags: , , , , , , , , , , , , , , , , , , , , ,