Efficiency of Elpan/Wanpan heating system in comparison with heat efficiency using traditional radiators is backed up by scientific tests. The thermal encirclement and heat distribution are main factors to define efficiency of any kind of heating system. Elpan/Wanpan heating panels are mounted around the perimeter of room. 
It does not take much time to heat premises when heat is rising up (30%) and at the same time flows into the center of the room (70%).
In short period of time, using Elpan/Wanpan skirting board heating system, the most even temperature (0.5 degree of C – red lines) between the floor level and bellow the ceiling is achieved and minimum heat convection as well as the minimum heat consumption takes place.
Traditional radiators are mounted on one or two walls and therefore, the highest air convection is registered in the room. Big difference (5-7 degrees of C – blue lines) of temperature between the floor level and bellow the ceiling leads to higher air convection as well as higher heat losses and lower heating efficiency.
Upper blu line – the temperature bellow the ceiling, using traditional radiators. Lower blu line – the temperature at the floor level, using traditional radiators. Upper red line – temperature bellow the ceiling, using Elpan/Wanpan heating system. Lower red line – the temperature at the floor level, using Elpan/Wanpan heating system.
Traditional radiators are mounted on one or two walls and therefore, the highest air convection is registered which leads to higher heat losses and lower heating efficiency. Efficiency of Elpan/Wanpan heating system in comparison with traditional radiators is clearly iliustrated by the difference of temperatures in between the floor level and bellow the ceiling.
For more information go to: www.wanpan-usa.com.
c area into a cozy room. 
THE ULTIMATE HEATING SYSTEM 